My A&R Academy

Learn the game. Then run it.

Short lessons on recording, mixing, making visuals and releasing music. Each one ends with the tool that does the work for you. All lessons are free.

Record4 min

Gain staging 101

Level is the first thing every plugin reacts to. Get it right and your presets just work.

Open lesson →

  1. Record at 24-bit. Set the preamp so normal singing sits near -18 dBFS and the loudest words peak around -10 to -6 dBFS.
  2. Never let the meter hit red. You can turn a quiet take up later, but you cannot fix clipping.
  3. Before mixing, run each stem through Mix Lab. It tells you exactly how much clip gain to add or remove.
  4. Set clip gain before plugins and leave faders at 0 dB while you build the chain. Faders come last.
Open Mix LabFree
Record5 min

Vocal chain order

The order of plugins changes the sound. Here is the order most engineers start with.

Open lesson →

  1. Pitch correction first, so every plugin after it hears the tuned vocal.
  2. Corrective EQ: cut rumble with a high-pass filter and cut muddy or boxy spots.
  3. Compressor 1 catches fast peaks (1176 style). Compressor 2 smooths the level (LA-2A style).
  4. De-esser to tame harsh "s" sounds, then tone EQ to add air and presence.
  5. Reverb and delay go on sends, not inserts, so you can blend them.
  6. Studio Builder writes this chain for your exact DAW and plugins, including an ad-lib version.
Build my chainFree
Record3 min

Ad-libs and doubles that sit right

Ad-libs should add energy without fighting the lead.

Open lesson →

  1. Stage ad-libs to the same level as the lead first, then pull the fader down 3–6 dB.
  2. Use more compression and a faster release on ad-libs than on the lead.
  3. Pan doubles left and right. Keep the lead in the center.
  4. Cut a little 2–4 kHz on doubles so the lead stays clear.
Get an ad-lib chainFree
Mix & master4 min

Loudness for streaming

Streaming apps turn loud songs down. Louder is not always better.

Open lesson →

  1. Loudness is measured in LUFS. Many streaming masters land between -14 and -9 LUFS integrated.
  2. Keep true peak at or below -1 dBTP so your song does not distort after conversion.
  3. Watch dynamics: a very loud master can sound flat after streaming turns it down.
  4. Use Mix Lab to measure. Use the Audio Editor "Clean & finish" to hit a streaming target.
Finish my songFree
Mix & master3 min

Five checks before you send a mix

A quick list that catches most problems.

Open lesson →

  1. Mono check: the vocal and 808 should not disappear in mono.
  2. No clipping anywhere on the timeline.
  3. Low end: kick and 808 should not fight. Sidechain or EQ one of them.
  4. Listen on phone speakers, earbuds and a car.
  5. Compare to a reference song at the same loudness.
Check my mixFree
Create5 min

Prompt guide for music videos

Write prompts like a director, not like a search box.

Open lesson →

  1. Start with the shot: "Slow dolly-in, 35mm, low angle."
  2. Then the subject and action: who, wearing what, doing what.
  3. Then the place and light: "rain-soaked street at night, neon signs, wet reflections."
  4. Then the mood and grade: "moody, teal and amber, film grain."
  5. Press "Enhance prompt" (free) to add big-budget detail, then generate.
  6. Keep the same wardrobe and location words across shots so scenes match.
Make a video (credits)Credits
Create3 min

Album covers that read on a phone

Most fans see your cover as a tiny square.

Open lesson →

  1. Use one strong subject and simple shapes.
  2. Keep the title big or leave it off. Small text disappears.
  3. High contrast beats lots of detail.
  4. Export at 3000 × 3000 pixels for distributors.
Make a cover (credits)Credits
Create4 min

Post daily without burning out

One long video can become a week of posts.

Open lesson →

  1. Film one performance or studio session.
  2. Clip Studio finds the best moments, adds captions and frames them vertical.
  3. Post the strongest hook first. The first 2 seconds matter most.
  4. Reuse the same sound in every post so fans connect the clips to the song.
Open Clip Studio (credits)Credits
Release5 min

A simple release rollout

Plan four weeks before release day, not four hours.

Open lesson →

  1. 4 weeks out: finish the master and cover. Send to your distributor.
  2. 3 weeks out: pitch to playlists through your distributor. Start teasers.
  3. 1 week out: daily clips with the hook. Set up a pre-save.
  4. Release week: post every day, go live, thank fans, and share streams.
  5. Release Plan builds this calendar for your genre and goals.
Build my planFree
Release2 min

How credits work on My A&R

Pay only for AI generations. Everything else is free.

Open lesson →

  1. Free: Mix Lab, Mix Studio, Studio Builder, the AI Audio Editor, Release Plan, prompt enhancement and all lessons.
  2. Credits: image, video, lip-sync and Clip Studio sessions, because they run on paid AI engines.
  3. You always see the credit cost before you create.
  4. If a job fails, the credits go back to your balance automatically.
See credit packsFree

Still have questions?

Most answers are in the FAQ.

Read the FAQ